Timer and Stopwatch with LED’s – Schematic

The schematic used in this project was based off of the same general schematic used for the previous two labs. Some extraneous portions of these previous schematics were removed, but the basic circuit connecting the board to the LCD with a potentiometer for dimming was left untouched. The notable addition made by our group was the common cathode RGB LED connected to PC0, PC1, and PC2, along with three current limiting resistors connecting the three leads to the board. This LED, though admittedly not used to its full potential, was used to indicate pauses in the operations of functions as well as the completion of the timer function.